How to make packaging for small Chocolates

Hello Crafty Friends 🙂
Monika here.
Today I will show you how to make a packaging for small chocolates.
A few photos for details.
The order of work in the card:
1) I’m preparing the base
2) Glue the background to the base.
3) I tie the packaging with a ribbon.
I glue the ribbon in the middle with hot glue.
4) I mask the place where I attached the ribbon with a napkin.
5) I added flowers, leaves and an inscription.
6) Complete the whole with dew drops.
Card is ready 🙂
Robin’s Nest Products I used

 
Hope you guys will find this inspiring and try this out yourself!
And don’t forget to keep craftivating your dreams!
Hugs Monika

How to Make Packaging for Chocolates

Hello Crafty Friends 🙂
Monika here.
Today I will show you how to make a packaging for chocolates.
A few photos for details
The order of work in the card:
1) I’m preparing the base

2) Glue the background to the base.

3) I tie the packaging with a ribbon.
I glue the ribbon in the middle with hot glue.
4) I mask the place where I attached the ribbon with a napkin.
5) I added flowers, leaves and an inscription.
6) Complete the whole with dew drops.
Card is ready 🙂
Robin’s Nest Products I used

Hope you guys will find this inspiring and try this out yourself!
And don’t forget to keep craftivating your dreams!
Hugs Monika

Easter Egg with Dew Drops

Hola saleros@s!!

Hello “saleros@s”!!

Se acercan las fiestas de Pascua y nos ponemos como locos a buscar huevos. Os gustaría encontrar uno como éste?
The Easter festivities are coming up and we’re crazy to look for eggs. Would you like to find one like this?

Materiales que vamos a utilizar :

Materials that we are going to use:
dewdrops, huevo porespan, cintas, rejilla fontanero, flores, papel arroz, pegamento decoupage, pistola silicona.
dewdrops, porespan egg, ribbons, plumber grid, flowers, rice paper, decoupage glue, silicone gun.

En la nueva tienda on line de Dew drop love encontraremos:

The Robin´s Nest on line store will find:
Coral Diamond Dew Drops
Petunia Dew Drops
Pansini Mini Dew Drops
Two Lips Tear Drops

Espero que os guste!!. 

I hope you like it!

 

 

Vamos con el paso a paso!
Come on with step by step!

Recortamos el papel de arroz y lo encolamos al huevo.
We cut the rice paper and glue it to the egg.

 

Le añadimos la rejilla, la cinta, la flor…
We add the grid, the ribbon, the flower…

Y los dewdrops, tanto arriba donde colocamos el colgador, como abajo entre la cinta enrollada.
And the dewdrops, both up where we place the hanger, and down between the rolled tape.

 

Y aquí vemos le resultado final!. Bonito, verdad?
And here we see the final result!. Pretty, isn’t it?



Me encantará ver vuestras interpretaciones!!. Y no olvidéis seguirnos en Facebook.

I love to see your interpretations!!. And don’t forget to follow us on Facebook.

Además en el Blog Chattering Robins encontraréis cantidad de inspiraciones para vuestros proyectos!.
In addition to the Blog Chattering Robins you will find a number of inspirations for your projects!.

A Dew Drop Coaster

Welcome to another blogpost! Today I am sharing with you a coaster I made with Dew Drops and Resin. Of course I used a few other embellishments to bring to all together.

I have a full tutorial for your below so you can follow along and make your own coasters!
The supplies you will need are:
  • Water Dew Drops
  • Silicone Mold
  • Resin
  • Starfish embellishment
  • Sand
  • Eggshells
  • Gold glitter

 

Follow the steps below:
Step 1: Mix the resin according to package directions. Pour a small amount into the silicone mold covering the base.
Step 2: Arrange the starfish embellishment, eggshells and the sand.

 

Step 3: Arrange the Dew Drops, sprinkle with glitter and allow to set for a bit before filling with resin.

 

Step 4: Heat to allow bubbles to come to the surface and pop.

 

Step 5: Allow to set according to package directions before handling. Remove from mold.

 

That’s it! Look at that beautiful coaster!
Thanks for stopping by! You can share your creations with us on our Facebook page. We would love to see them! For more inspiration have a look around the blog. There are a variety of tutorials for many levels using Dew Drops. You can also visit my blog at www.papermachepatch.com. You can find Dew Drops online at The Robin’s Nest.

 

Happy Crafting!
Suzette

Create a Butterfly Shaped Magnet

Hello all,

Had an enjoyable time making this butterfly shaped magnet.  It’s a quick and easy project that even the kids can do.  Check out the step by step instructions below.

The Robin’s Nest



Other Materials:

  • Paper Accents – Chipoard Shapes, Butterfly
  • DecoArt Dazzling Metallics – White Pearl
  • Deco Art Americana Premium -White Gesso
  • Thin gauge wire
  • Magnet

 

Instructions:

 

1) Start with a butterfly shaped chipboard.


2) Pain chipboard butterfly with white gesso.  Allow to dry.

3) Paint chipboard butterfly with Metallic Pearl White paint.

4) Adhere Black Dew Drops around edges of butterfly.

5) Adhere Pearl White Dew Drops to center of butterfly.


4) Adhere various colors and sizes of dew drops to center.


 5) Shape thin wire around paint brush to create antennae.


 6) Adhere wire and magnet to back of butterfly.



7) Done!

Hope you enjoyed this project and will try it out for yourself.  You could make with a variety of chipboard shapes and they would make great gifts.

Happy day!

Lori

COMPANIES THAT I AM AFFILIATED WITH AND/OR DESIGN FOR MAY HAVE PROVIDED ME WITH SOME PRODUCT TO CREATE THIS PROJECT. THE OPINIONS I SHARE ARE SOLELY MY OWN.

How to Make a Quick Shamrock Card

Hi Gals, it’s Karen here today. If you need the luck of the Irish, then follow along and I will show you how to make the cutest little shamrocks. I made a card with them but once you see how simple it is, then you can embellish anything for St. Patrick’s Day. All you need are green Tear Drops!

 

 

Directions:
1.  Cut a piece of pattern paper 1.5×5″

2.  Create 3 shamrocks with green tear drops.  To form a shamrock, first draw the stem with a green marker.  Then adhere 3 green tear drops to form the leaves.  Attach 3 shamrocks in a row on the patterned paper and set aside to dry.

3. Use a dotty embossing folder to add texture to the lower half of a green card base. Adhere the paper with shamrocks to the top section of the card.

4.  Use liquid glue to adhere round green Dew Drops to the center of small flowers.

5.  Attach a row of flowers along the top and lower edge of the rectangle.


Other Supplies:

  • dotty embossing folder
  • small flowers
  • green marker
  • patterned paper
  • green card base
  • liquid adhesive
Thanks for visiting. Come back soon!
If you would like to see more of Karen’s fun projects, stop by her blog Art & Soul.

How to Make Card Box

Hello Crafty Friends 🙂
Monika here.
Recently, I showed you a wedding anniversary card.
Today I will show you a box that I created for the set.
A few photos for details.
The order of work in the card:
1)  Glue the background to the base box.
2) I added two layers of rectangular paper on the distance cubes.
3) I added a flower and leaves.
4) Complete the whole with dew drops.
5) At the end I glued the sides of the box.
Box is ready 🙂
Robin’s Nest Products I used
 
Hope you guys will find this inspiring and try this out yourself!
And don’t forget to keep craftivating your dreams!
Hugs Monika

Lovely Hearts Ornament

Hello, today I am on the blog with Robin’s Nest Designs using Dew Drops. I love the dew drops, they are so fun to use and I seem to be embellishing everything with them!

My first project this month is a Valentine Ornament that could be used as a card or tag for that someone special.

I used an image from Gecko Galz, white heart doily, a red doily, a burlap heart, kraft paper, red and white twine, and Love Birds Tear Drops.

I have to apologize for the white doily below, I used a heart but took a picture of a round doily. You know how you get in the zone when creating, I do that often then forget to take pictures, so I sometimes have to go back and try to recreate what I used and I only had one white heart doily!

I cut out my image then inked the edges with Distress Ink Vintage Photo, set it aside.
Then layer the red doily over the white one and glue, lay the burlap heart over the red/white doilies and glue down.
I then added the image to the center. I then laid this layered piece over the kraft paper and cut it along the edge following the heart shape. I then punched a hole in the top and strung it with the twine.
When everything was dry, I then add the red tear-shaped dew drops around the edge.
Your ornament/tag/card is now ready for giving! Be sure to stop back by for more art. XOXO Kelly

A Dew Drop Heart

Hello, welcome to another blog post! With Valentine’s Day in the air, I decided to make a heart that can be used as an ornament or an embellishment. It is made with Delight clay that is so light that this could even be used on a card! Isn’t that beautiful!

It is a very easy project and great to do with the kids. You only need a few supplies which I have listed below.

 

Supplies needed:

Golden Berry Dew Drops
Delight Clay™
heart-shaped cookie cutter
Apple Barrel Acrylic – Flag Red
Mod Podge Gloss
red Glitter
embellishment glue

Please follow along in the video below:

Thanks for stopping by! You can share your creations with us on our Facebook page. We would love to see them! For more inspiration have a look around the blog. There are a variety of tutorials for many levels using Dew Drops. You can also visit my blog at www.papermachepatch.com.
You can find Dew Drops online at The Robin’s Nest.
Happy Crafting!
Suzette

 

Give Them a Permanent Conversation Heart with Dew Drops

It’s hard to believe it’s time to begin thinking about what to do for Valentine’s Day.  I have a wonderful idea, that requires a little planning and a bit of patience to execute, to share with you today.  This project will take and hour to prepare and 24 hours to complete.

Materials:



Dew Drops, I particularly love how the mix of black white and red came out
Prima extra fine glitter
Heart shaped mold – I selected one from Wilton brand
Plastic cups with graded measurements 8oz disposable plastic cups for paint and epoxy mixing
Wooden mixing sticks
Art n’ Glow Clear Casting and Coating Epoxy Resin – 16 ounce kit
Reynolds non-stick foil
Torch or heat gun

Steps:

1.  Prepare everything you need on your work table.  I recommend covering your table with butcher paper in case of spills.  The epoxy hardens everywhere!

2.  In separate cups put equal amounts of epoxy resin and hardener.  I used six ounces of each.

3.  Mix resin and hardener as directed with a wooden mixing stick in a third plastic cup. Once the resin is thoroughly mixed you will have about 40 minutes to work with it before it begins hardening.

4.  Pour resin mixture into prepared forms

 

5. Add dew drops in your favorite color and add glitter as desired.

6.  Heat with torch or heat gun to remove bubbles

7.  Cover with foil and leave to dry in a flat place for 24 hours, this allows the resin to cure and harden.  After 24 hours you can unmold your hearts!  If you wish you can add rub ons on the back in your favorite words, or just keep them plain and display them!

Hope you have a great time making this little token of Valentine love!

~ Victoria